Greenhouse gas emissions, carbon stocks and wheat productivity following biochar, compost and vermicompost amendments: comparison of non-saline and salt-affected soils.

Understanding the impact of greenhouse gas (GHG) emissions and carbon stock is crucial for effective climate change assessment and agroecosystem management. However, little is known about the effects of organic amendments on GHG emissions and dynamic changes in carbon stocks in salt-affected soils. We conducted a pot experiment with four treatments including control (only fertilizers addition), biochar, vermicompost, and compost on non-saline and salt-affected soils, with the application on a carbon equivalent basis under wheat crop production. Our results revealed that the addition of vermicompost significantly increased soil organic carbon content by 18% in non-saline soil and 52% in salt-affected soil compared to the control leading to improvements in crop productivity i.e., plant dry biomass production by 57% in non-saline soil with vermicompost, while 56% with the same treatment in salt-affected soil. The grain yield was also noted 44 and 50% more with vermicompost treatment in non-saline and salt-affected soil, respectively. Chlorophyll contents were observed maximum with vermicompost in non-saline (24%), and salt-affected soils (22%) with same treatments. Photosynthetic rate (47% and 53%), stomatal conductance (60% and 12%), and relative water contents (38% and 27%) were also noted maximum with the same treatment in non-saline and salt-affected soils, respectively. However, the highest carbon dioxide emissions were observed in vermicompost- and compost-treated soils, leading to an increase in emissions of 46% in non-saline soil and 74% in salt-affected soil compared to the control. The compost treatment resulted in the highest nitrous oxide emissions, with an increase of 57% in non-saline soil and 62% in salt-affected soil compared to the control. In saline and non-saline soils treated with vermicompost, the global warming potential was recorded as 267% and 81% more than the control, respectively. All treatments, except biochar in non-saline soil, showed increased net GHG emissions due to organic amendment application. However, biochar reduced net emissions by 12% in non-saline soil. The application of organic amendments increased soil organic carbon content and crop yield in both non-saline and salt-affected soils. In conclusion, biochar is most effective among all tested organic amendments at increasing soil organic carbon content in both non-saline and salt-affected soils, which could have potential benefits for soil health and crop production.

A PDMS-encapsulated cylindrical non-closed-packed photonic crystals composite with Bragg-enhanced Fresnel reflectance for optical gain and spectral selection.

According to the Fresnel theory, the reflectivity intensity of spherical and cylindrical convex surfaces decreases from their edge to center, and it is noteworthy and interesting for optical gain to study the enhancement of center reflectance. In this paper, a polydimethylsiloxane (PDMS) - encapsulated cylindrical non-closed-packed photonic crystals (NPCs) composite with Bragg-enhanced Fresnel reflectance was designed for spectral selectivity and optical gain. Theoretically and experimentally, the periodically ordered structure of NPCs achieved high-reflection of light in photonic bandgap and high-transmission in other bands, which enhanced Fresnel reflectivity of the convex center to specific bands. Furtherly, the cylindrical NPCs hydrogel with stretchability was applied for the dynamic tuning of optical signals. The reflection peak of the PDMS-encapsulated cylindrical NPCs composite blue-shifted from 608 nm to 413 nm with 50 % tensile strain and achieved a rapid transition of structural color from orange to blue-violet in 60 cycles. The new kind of photonic crystals composite for optical gain and spectral selection broke through the limitations of traditional Fresnel curved mirrors with the lowest central reflectivity and inability to perform spectral selectivity, and have great significance and application prospects in fields of signal transmission, optical measurement, and instrument design.

Biochar enhances the growth and physiological characteristics of Medicago sativa, Amaranthus caudatus and Zea mays in saline soils.

Biochar is a promising solution to alleviate the negative impacts of salinity stress on agricultural production. Biochar derived from food waste effect was investigated on three plant species, Medicago sativa, Amaranthus caudatus, and Zea mays, under saline environments. The results showed that biochar improved significantly the height by 30%, fresh weight of shoot by 35% and root by 45% of all three species compared to control (saline soil without biochar adding), as well as enhanced their photosynthetic pigments and enzyme activities in soil. This positive effect varied significantly between the 3 plants highlighting the importance of the plant-biochar interactions. Thus, the application of biochar is a promising solution to enhance the growth, root morphology, and physiological characteristics of plants under salt-induced stress.

Efficient Adsorption of Methylene Blue Using a Hierarchically Structured Metal-Organic Framework Derived from Layered Double Hydroxide.

The growing concerns about environmental pollution, particularly water pollution, are causing an increasing alarm in modern society. One promising approach to address this issue involves engineering existing materials to enhance their effectiveness. A one-step solvothermal reconstruction approach was used to build an eco-friendly two-dimensional (2D) AlNiZn-LDH/BDC MOF composite. The characterizations confirm the formation of a metal-organic framework (MOF) at the layered double hydroxide (LDH) surface. The resulting synthesized material, 2D AlNiZn-LDH/BDC MOF, demonstrated remarkable efficacy in decontaminating methylene blue (MB), a model cationic dye found in water systems. The removal performance of 2D AlNiZn-LDH/BDC MOF was significantly higher than that of pristine 2D AlNiZn-LDH. This improvement shows the potential to increase the adsorption capabilities of nanoporous LDH materials by incorporating organic ligands and integrating meso-/microporosity through MOF formation on their surfaces. Furthermore, their kinetic, isothermal, and thermodynamic studies elucidated the adsorption behavior of this composite material. The results of synthesized MOF showed excellent removal efficiency (92.27%) of 10 ppm of MB aqueous solution as compared to pristine LDH. Additionally, the as-synthesized adsorbent could be regenerated for six successive cycles. This method holds promise for the synthesis of novel and highly effective materials to combat water pollution, laying the groundwork for potential advancements in diverse applications.

Development of Poly(vinyl alcohol)-Chitosan Composite Nanofibers for Dual Drug Therapy of Wounds.

Current trends in localized drug delivery are emphasizing the development of dual drug-loaded electrospun nanofibers (NFs) for an improved therapeutic effect on wounds, especially infected skin wounds. The objective of this study was to formulate a new healing therapy for an infected skin wound. To achieve this goal, this study involved the development and characterization of poly(vinyl alcohol) (PVA)/chitosan nanofibers loaded with ciprofloxacin and rutin hydrate. Polymers and drugs were used in different ratios. Nanofiber morphology was studied by scanning electron microscopy, thermal stability by thermogravimetric analysis, structural determination by the X-ray diffraction method, and integrity by Fourier transform infrared spectroscopy. Dissolution studies were performed to check the drug release behavior of the formulations. Antibacterial studies were performed against Staphylococcus aureus and Pseudomonas aeruginosa. The wound healing efficiency of dual drug-loaded nanofibers was measured by a full-thickness excisional wound model of rabbits. The fabricated nanofibers were smooth in morphology. According to FTIR findings, the drugs remained intact in the nanofibers. The results of swelling ratio and porosity revealed that the pore size was increased as the amount of chitosan was increased up to 30% but a further increase in chitosan concentration reduced the swelling ratio and porosity. Drug release studies of nanofibers depicted an initial burst effect and afterward controlled drug release behavior. Drug-loaded nanofibers showed better activity against S. aureus than P. aeruginosa. The antibacterial efficacy of rutin hydrate with ciprofloxacin was improved compared to that of the formulation having rutin hydrate only, likely due to the additive effect in activity. Based on wound healing studies, nanofibrous membranes acted as a promising wound dressing material as compared to the commercial wound healing formulation. Drug-loaded polymeric nanofibers were successfully fabricated by using an electrospinning method. These nanofibers showed an efficient ability to deliver drugs and treat infected wounds.

Redox mechanisms of environmental toxicants on male reproductive function.

Humans and wildlife, including domesticated animals, are exposed to a myriad of environmental contaminants that are derived from various human activities, including agricultural, household, cosmetic, pharmaceutical, and industrial products. Excessive exposure to pesticides, heavy metals, and phthalates consequently causes the overproduction of reactive oxygen species. The equilibrium between reactive oxygen species and the antioxidant system is preserved to maintain cellular redox homeostasis. Mitochondria play a key role in cellular function and cell survival. Mitochondria are vulnerable to damage that can be provoked by environmental exposures. Once the mitochondrial metabolism is damaged, it interferes with energy metabolism and eventually causes the overproduction of free radicals. Furthermore, it also perceives inflammation signals to generate an inflammatory response, which is involved in pathophysiological mechanisms. A depleted antioxidant system provokes oxidative stress that triggers inflammation and regulates epigenetic function and apoptotic events. Apart from that, these chemicals influence steroidogenesis, deteriorate sperm quality, and damage male reproductive organs. It is strongly believed that redox signaling molecules are the key regulators that mediate reproductive toxicity. This review article aims to spotlight the redox toxicology of environmental chemicals on male reproduction function and its fertility prognosis. Furthermore, we shed light on the influence of redox signaling and metabolism in modulating the response of environmental toxins to reproductive function. Additionally, we emphasize the supporting evidence from diverse cellular and animal studies.

Enhanced thermal conductivity of plasma generated ZnO-MgO based hybrid nanofluids: An experimental study.

Hybrid nanofluids (HNFs) of metallic oxide-based nanoparticles (NPs) have been prepared in different basefluids (BFs) employing the thermal plasma technique. NPs of ZnO-MgO were directly dispersed into pristine coolant, engine oil, distilled water (DW), and coconut oil. Plasma was generated between two identical electrodes applying 8.0 kV at the ambient conditions and proved economically viable in preparing stable HNFs. X-ray Diffractometry (XRD) showed ZnO and MgO NPs possessed hexagonal and cubic crystal structures, respectively. The band gap is calculated through UV-visible spectroscopy. The thermal conductivity (TC) of the HNFs has been measured using a thermal conductivity analyzer based on the transient hot wire method. The band gaps of pristine coolant and its HNFs were obtained to be 3.35 eV and 3.33 eV, respectively. In engine oil and its HNFs, band gaps of 3.16 eV and 3.02 eV have been extracted. There appears to be a slight reduction in band gap for coolant and engine oil-based HNFs. The band gap value of coconut oil-based HNFs was 4.05 eV, which showed a higher value than the pristine coconut oil-based HNFs (3.95 eV). The band gap calculated in the case of DW-based HNFs was 3.79 eV. TC of HNFs with volume concentration of 0.019 % for DW, 0.020 % for coolant, 0.016 % for engine oil, and 0.017 % for coconut oil were tested between 20 and 60 °C. An increase in TC was observed with the rise in temperature of the HNFs. Maximum increment in TC was observed at 60 °C for coolant-based HNFs, which was 19 %, followed by DW (18%), coconut oil (18%), and engine oil (16%), respectively. DW-based HNFs can be used as a coolant and optical filter for optoelectronics devices like photovoltaic cells for better performance. The study underscores precise control of NPs size as pivotal for band gap influence. HNFs hold promise as the next-gen heat transfer fluids (HTFs), revolutionizing thermal conductivity across industries. This research lays a firm foundation for plasma-synthesized HNFs' application in enhanced heat transfer and optoelectronic devices. Coolant-based HNFs excel in thermal conductivity, addressing heat transfer challenges.

Formulation and characterization of glipizide solid dosage form with enhanced solubility.

Glipizide, a poor water-soluble drug belongs to BCS class II. The proposed work aimed to enhance the solubility of glipizide by preparing solid dispersions, using polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG). Solvent evaporation method was used for the preparation of glipizide solid dispersions. Solid dispersions were prepared in four different drug-to-polymer ratios i.e. 1:1, 1:2, 1:3 and 1:4. Mainly effect of three polymers (PVP K30, PVP K90 and PEG 6000) was evaluated on the solubility and dissolution of glipizide. The in-vitro dissolution of all prepared formulations was performed under pH 6.8 at 37°C using USP type II apparatus. In-vitro dissolution results revealed that the formulations having high concentrations of the polymer showed enhanced solubility. Enhancements in the solubility and rate of dissolution of the drug were noted in solid dispersion formulations compared to the physical blends and pure drug. Solid dispersions containing polyvinyl pyrrolidone exhibited a more favorable pattern of drug release compared to the corresponding solid dispersions with PEG. An increase in the maximum solubility of the drug within the solid dispersion systems was observed in all instances. Two solid dispersion formulations were optimized and formulated into immediate-release tablets, which passed all the pharmacopoeial and non-pharmacopoeial tests. Fourier transformed Infrared (FTIR) spectroscopy X-ray diffraction (XRD) and Differential scanning calorimetry (DSC) were used to indicate drug: polymer interactions in solid state. Analysis of the solid dispersion samples through characterization tests indicated the compatibility between the drug and the polymer.

In Vivo Wound Healing Potential and Molecular Pathways of Amniotic Fluid and Moringa Olifera-Loaded Nanoclay Films.

Cutaneous wounds pose a significant health burden, affecting millions of individuals annually and placing strain on healthcare systems and society. Nanofilm biomaterials have emerged as promising interfaces between materials and biology, offering potential for various biomedical applications. To explore this potential, our study aimed to assess the wound healing efficacy of amniotic fluid and Moringa olifera-loaded nanoclay films by using in vivo models. Additionally, we investigated the antioxidant and antibacterial properties of these films. Using a burn wound healing model on rabbits, both infected and non-infected wounds were treated with the nanoclay films for a duration of twenty-one days on by following protocols approved by the Animal Ethics Committee. We evaluated wound contraction, proinflammatory mediators, and growth factors levels by analyzing blood samples. Histopathological changes and skin integrity were assessed through H&E staining. Statistical analysis was performed using SPSS software (version 2; Chicago, IL, USA) with significance set at p < 0.05. Our findings demonstrated a significant dose-dependent increase in wound contraction in the 2%, 4%, and 8% AMF-Me.mo treatment groups throughout the study (p < 0.001). Moreover, macroscopic analysis revealed comparable effects (p > 0.05) between the 8% AMF-Me.mo treatment group and the standard treatment. Histopathological examination confirmed the preservation of skin architecture and complete epidermal closure in both infected and non-infected wounds treated with AMF-Me.mo-loaded nanofilms. RT-PCR analysis revealed elevated concentrations of matrix metalloproteinases (MMPs) and vascular endothelial growth factor (VEGF), along with decreased levels of tumor necrosis factor-alpha (TNF-α) in AMF-Me.mo-loaded nanofilm treatment groups. Additionally, the antimicrobial activity of AMF-Me.mo-loaded nanofilms contributed to the decontamination of the wound site, positioning them as potential candidates for effective wound healing. However, further extensive clinical trials-based studies are necessary to confirm these findings.

Board characteristics, institutional ownership, and investment efficiency: Evidence from an emerging market.

This study investigates the impact of board governance mechanism on investment efficiency (IE) in PSX-listed firms. The study also examines the role of institutional ownership (IO) in board-IE relationships. In addition, we extend our analysis to re-examine this relationship by splitting the sample into two groups, i.e., the introductory phase of corporate governance (CG) i.e., 2004 to 2013, and revised codes of CG (2014 to 2018) to examine the impact of these separately on IE. The sample data comprises 155 non-financial PSX-listed firms from 2004 to 2018. IE is measured using firms' growth opportunities. The random effect model is used to test the study's hypotheses. A robustness test is also performed to validate the study's findings. The paired-sample t-test results show a significant improvement in IE after revising the CG codes in 2012. According to the regression results, board size has a significant direct, whereas board diversity has a significant inverse effect on IE. Regarding moderating effect, IO was found to moderate the relationship between board independence and IE significantly. Furthermore, it was discovered that following the issuance of revised CG codes-2012, the level of board independence and diversity increased in PSX-listed firms; however, only diversity positively impacted IE, and board independence had no impact on IE from 2014 to 2018. Despite the issuance of revised CG codes-2012, the level of CG among PSX-listed firms is low, which is a source of concern for regulators such as the Securities and Exchange Commission of Pakistan.

Rheumatoid Arthritis Treatment Potential of Stearic Acid Nanoparticles of Quercetin in Rats.

This study aims to assess the anti-inflammatory potential of stearic acid nanoparticles of quercetin in an arthritic rat model. This article describes the fabrication of solid lipid nanoparticles (SLNs) using the hot melt encapsulation method, followed by the anti-inflammatory study of SLNs and other characterizations such as FTIR, XRD, and SEM. Thirty male healthy albino rats were taken and treated with FCA to induce rheumatoid arthritis. Quercetin loading of quercetin to stearic acid was confirmed by FTIR. The efficacy of quercetin-loaded SLNs to reduce inflammation was evaluated with the help of inflammatory biomarker levels. Quercetin-loaded stearic acid nanoparticles were successfully prepared by using a hot melt encapsulation method. Their average size and zeta potential were 100 nm and -25 mV, respectively. Rheumatoid arthritis was significantly (p < 0.001) reduced in the quercetin-loaded SLN group, as indicated by finding out the reduced levels of inflammatory mediators such as tumor necrosis factor (TNF-α) and rheumatoid factor. Quercetin-loaded stearic acid nanoparticles were found to be potentially effective in treating RA.

Naked-Eye Visual Thermometer Based on Glycerol─Nonclose-Packed Photonic Crystals for Real-Time Temperature Sensing and Monitoring.

Real-time sensing and monitoring of temperature are of great significance for assessing human health. The sensitivity and stability are inevitable issues for thermometers. In this study, a thermometer with the cylindrical thermochromic hydrogel was prepared for real-time visual monitoring of temperature, which had excellent temperature sensitivity, angle-independence axially, and environmental stability. The customization of their initial optical properties depended on the PMMA concentrations and the content of the hydrogel monomer. The glycerol introduced with solvent displacement formed hydrogen bonds with the hydrogel network, which stabilized their mechanical properties, and the reflection peak blue-shifted from 653 to 499 nm when tensile strain was 57.85%. At the same time, the environmental stability originated from the moisturizing properties of the glycerol, which enabled the hydrogel to reliably transmit the information on temperature into the air without losing moisture. The reflection peak of the cylindrical thermochromic hydrogel shifted from 657 to 455 nm when the temperature increased from 22 to 45 °C, which realized temperature visual monitoring in the full-color range. The temperature sensitivity of the glycerol─nonclose-packed photonic crystals remained stable for 1 month, which provided an optimal option for continuous visual temperature monitoring.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review.

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Radiotherapy of prostate and head-and-neck tumour: An optimal treatment planning comparison for intensity modulated radiotherapy and volumetric modulated arctherapy techniques.

OBJECTIVE: To evaluate and compare merits between intensity modulated radiotherapy and volumetric modulated arc-therapy radiotherapy techniques to determine which technique can achieve better treatment plan quality and efficient delivery. METHODS: The retrospective study was conducted at the Radiation Oncology Department of SanBorotlo Hospital, Vicenza, Italy, in 2019, and comprised data from Jan 2019 to Dec 2019 related to prostate and head-and-neck patients in whom Pinnacle³ treatment planning system was used for optimisation with different prescribed doses and target geometries for intensity modulated radiotherapy and volumetric modulated arc-therapy techniques. Treatment plans were simulated using 6MV photon beam of SynergyS® Linac (Linear accelerator). The plan quality was evaluated using dose-volume indices for planning target-volume and organs-at-risk. ArcCHECK™ phantom was used for dose agreement verification between planed and delivered doses. RESULTS: Data of 8 patients was analysed. Intensity modulated radiotherapy and volumetric modulated arc-therapy treatment plan quality for prostate was found to be similar, but volumetric modulated arc-therapy had significant results for maximum dose (p=0.005). Intensity modulated radiotherapy and volumetric modulated arc-therapy plans for head-and-neck achieved adequate target coverage and sparing of organs at risk, and produced clinically acceptable treatment plans. The percentage of target coverage (p=0.001), dose maximum (p=0.013) and conformity index (p=0.000) were significant. A significant gain for all planning target volume dose-volume indices was noted (p<0.05). Volumetric modulated arc-therapy obtained better plan with significant values and improved sparing of organs at risk compared to intensity modulated radiotherapy for both prostate and head-and-neck treatments while maintaining doses to the organs at risk (p<0.05). CONCLUSIONS: Dynamic arc mode of beam delivery provided increased degrees of freedom of volumetric modulated arc-therapy beam intensity modulation, depicting superior dose distribution than intensity modulated radiotherapy.

Recent trends and economic significance of modified/functionalized biochars for remediation of environmental pollutants.

The pollution of soil and aquatic systems by inorganic and organic chemicals has become a global concern. Economical, eco-friendly, and sustainable solutions are direly required to alleviate the deleterious effects of these chemicals to ensure human well-being and environmental sustainability. In recent decades, biochar has emerged as an efficient material encompassing huge potential to decontaminate a wide range of pollutants from soil and aquatic systems. However, the application of raw biochars for pollutant remediation is confronting a major challenge of not getting the desired decontamination results due to its specific properties. Thus, multiple functionalizing/modification techniques have been introduced to alter the physicochemical and molecular attributes of biochars to increase their efficacy in environmental remediation. This review provides a comprehensive overview of the latest advancements in developing multiple functionalized/modified biochars via biological and other physiochemical techniques. Related mechanisms and further applications of multiple modified biochar in soil and water systems remediation have been discussed and summarized. Furthermore, existing research gaps and challenges are discussed, as well as further study needs are suggested. This work epitomizes the scientific prospects for a complete understanding of employing modified biochar as an efficient candidate for the decontamination of polluted soil and water systems for regenerative development.

Historical and current distribution ranges of the Asiatic black bear (Ursus thibetanus).

The current distribution of Asiatic black bear (Ursus thibetanus) is available on the IUCN Red List of Threatened species website; however, nothing is known about the historical extent and occurrence of this species. Therefore, we aimed to understand the historical distribution of the Asiatic black bear, and map and estimate its total size, to compare it with that of species current distribution. In addition, we analyzed a network of protected areas in the past and current ranges of the species. We employed geographic information system (GIS) software to reconstruct and measure the historical range of the Asiatic black bear, comparing past and current ranges to analyze its expected range contraction. The main focus of the study was to enhance our understanding of the species' historical distribution, contributing to better conservation strategies for the present and future perspectives. The utilization of GIS tools facilitates a comprehensive exploration of the factors influencing the species' decline, ultimately aiding in more effective management and conservation efforts. We used published records of black bear's occurrence in anywhere in history to reconstruct its historical distribution range. Results revealed that the Asiatic black bear was more widely distributed in historical times and its range spanned across approximately 15.86 million km2 while its current range is limited to approximately 7.85 million km2, showing a range contraction of approximately 49.5% (8.02 million km2 reduced). The total protected areas in the historical range of the species were found to be N = 9933, with total size of 0.946 million km2, against N = 6580 (0.667 million km2) that are present in the current range. Approximately 27.5% of the protected areas have lost the Asiatic black bear since historical times.

Improving the genetic potential of okra (Abelmoschus esculentus L.) germplasm to tolerate salinity stress.

Okra (Abelmoschus esculentus L.) is the most consumed vegetable worldwide with the potential for diverse ecological adaptation. However, increasing salinization and changing climatic conditions are posing serious threats to the growth, yield, and quality of okra. Therefore, to mitigate increasing soil salinization and ensure sustainable okra production under rapidly changing climatic conditions, evaluation of new okra germplasm to develop salt tolerant cultivars is direly needed. The present study was designed to evaluate the genetic resources of okra genotypes for salt tolerance at growth and reproductive phases. Based on mophological and physio-biochemical responses of plants under stress condition, genotypes were divided into salt tolerant and succeptible groups. The experiment was comprised of 100 okra genotypes and each genotype was grown under control conditions and 6.5 dS m-1 NaCl concentration in a pot having 10 kg capacity. The experiment was conducted in a completely randomized design and each treatment was replicated three times. The results showed vast genetic variability among the evaluated okra germplasm traits like days to emergence, pod length, pod diameter, plant height, stem girth, and other yield-related parameters. Correlation analysis showed a highly significant positive association among the number of leaves at first flower and plant height at first flower.Likewise, pod weight also revealed a highly significant positive relationship for pod weight plant-1, pod length, and K+: Na+. Principal Component Analysis (PCA) revealed that out of 16 principal components (PCs), five components showed more than one eigenvalue and the first six PCs contributed 67.2% of the variation. Bi-plot analysis illustrated that genotypes 95, 111, 133, 99, and 128, under salt stress conditions, exhibited both high yield per plant and salt-tolerant behavior in other yield-related traits. On the basis of all studied traits, a salt susceptible group and a salt-tolerant group were formed. The salt tolerant group comprised of 97, 68, 95, 114, 64, 99, 111, 133, 128, and 109 genotypes, whereas, the salt susceptible group contained 137, 139, 130, 94, and 125 genotypes. Salt-tolerant okra genotypes were suggested to be used in further breeding programs aimed to develop salt tolerance in okra. These insights will empower precision breeding, underscore the importance of genetic diversity, and bear the potential to address the challenges of salt-affected soils while promoting broader agricultural resilience, economic prosperity, and food security.

Social isolation during the COVID-19 pandemic is associated with the decline in cognitive functioning in young adults.

Coronaviruses have caused widespread disease and death worldwide, leading to the implementation of lockdown measures and the closure of educational institutions in various countries. This research aims to investigate the impact of social isolation on the cognitive functioning of young students. The study included 84 subjects, with 48 being socially isolated and 36 non-isolated individuals. The participants' mental health was assessed using the Mini-Mental State Examination (MMSE), while cognitive functions were evaluated through attention-switching tasks (AST), pattern recognition memory (PRM), and choice reaction time (CRT) tests utilizing the Cambridge Neuropsychological Automated Battery (CANTAB) software. The socially isolated group had an average age of 21.3 ± 1.1 years, whereas the non-isolated group had an average age of 22.8 ± 2.0 years. The MMSE scores were 25.8 ± 1.6 for the socially isolated group and 28.6 ± 1.3 for the non-isolated group. In terms of cognitive functioning, there were significant differences (p = 0.000) observed in the values of AST correct latency for non-switching blocks (blocks 3 and 5) between the socially isolated group (608.1 ± 139.2) and the non-isolated group (499.5 ± 67.8). Similarly, the AST mean correct latency for switching blocks (block 7) was significantly different (p = 0.012) between the socially isolated group (784.4 ± 212.5) and the non-isolated group (671.8 ± 175.6). The socially isolated group exhibited significantly higher values in AST correct mean latency, AST congruent mean latency, AST incongruent mean latency, and AST percent mean correct trials compared to the non-isolated group. Additionally, the PRM mean percent correct significantly differed (p = 0.000) between the isolated group (81.3 ± 12.0) and the non-isolated group (91.9 ± 9.2). The isolated group also showed a higher CRT correct mean latency (482.4 ± 128.9) than the non-isolated group (451.0 ± 59.0), however the difference was not significant. In conclusion, social isolation during the COVID-19 pandemic has resulted in a decline in the cognitive functioning of young students.

Development and characteristics study of compact Penning ion source.

A compact-size Penning ion source with a small discharge volume (1.24 cm3) is developed. It consists of two concentric cylinders of different heights that act as cathodes and one hollow cylindrical anode. A homogeneous magnetic field is achieved within the discharge volume with geometrical optimization of the ion source. As a result, dense plasma is generated at low discharge power. The dynamics of the pulse mode discharge at low pulse width and frequency of anode voltage are studied. A high discharge (hundreds of amperes) current pulse with low delay time and fast rise time is recorded. The ion source is equally efficient to operate in continuous as well as pulse modes of ionization for various gases. It is operated in a wide range of low pressure at low anode voltage. An extraction system is designed to extract ions efficiently in the axial direction at a variable extraction voltage. The beam current of 200 µA in continuous mode and 6 A fast pulse in the pulsed mode of discharge have been measured. Variable beam current can be extracted with variable extraction voltage for any potential application.